Configuring the lpr settings, Configuring the lpr settings -6 – Konica Minolta BIZHUB C652DS User Manual

Page 73

Advertising
background image

bizhub C652/C652DS/C552/C552DS/C452

6-6

6.1

Mac OS X 10.2/10.3/10.4/10.5

6

7

Click [Add].

When the selected printer is registered in the "Print & Fax", the setting procedure is completed.

% If the "Installable Options" window appears, proceed to change the option settings as necessary.

For details, refer to page 10-4.

Reference

-

For OS X 10.4, you can also add a printer by clicking [Add] in the "Printer Setup Utility" window.

Configuring the LPR settings

TCP/IP setting for the machine

Specify the IP address for the machine.

LPD setting for the printer

Before using LPR printing, enable LPD printing in "LPD Setting" for the machine.

d

Reference

For details on specifying the IP address for the machine, refer to the "User's Guide [Network Administrator]".

For details on the LPD settings for the machine, refer to the "User's Guide [Network Administrator]".

Configuring the TCP/IP settings for the computer

Configure the TCP/IP settings for the Macintosh computer connected to the printer.

1

In the "Apple" menu, select "System Preferences".

2

Click the "Network" icon.

3

The Ethernet setting window appears.

% For OS X 10.5, select "Ethernet", and then click [Advanced].

% For OS X 10.4, select "Built-in Ethernet", and then click [Configure].

4

Click the "TCP/IP" tab.

5

Configure the settings including the IP address and subnet mask according to the settings of the
network to which the Macintosh computer is connected.

6

Click the close button at the top left corner of the window.

% When the "This service has unsaved changes" message appears, click [Apply].

Adding a printer

1

In the "Apple" menu, select "System Preferences".

2

Click the [Print & Fax] icon.

3

Click [+] on the "Print & Fax" window.

4

Click [IP] or [IP Printer].

5

In "Protocol", select "LPD".

Advertising
This manual is related to the following products: