Konica Minolta pagepro 5650 - Manual (Page 104)

Specifying Print Settings (Mac OS X 10.5/10.6) 86
„ Layout Direction
If you are printing more than one page per sheet, this specifies the direc-
tion and order the pages should be arranged on each sheet of paper.
„ Border
This prints a border around the image for each of the pages printed on
one sheet of paper when more than one page is printed on one sheet of
paper.
„ Two-Sided
Select the desired setting for double-sided printing.
Off:
Double-sided printing is not performed.
Long-edge binding: Double-sided printing is performed with the bind-
ing along the long edge of the paper.
Short-edge binding: Double-sided printing is performed with the bind-
ing along the short edge of the paper.
"
To print on both sides of the paper, Duplex Unit must be
selected under Driver tab (p. 65).
The Long-edge biding check box or Short-edge biding
check box can be selected even when the Duplex Unit is not
installed. However, in this case, the print job will be cancelled.
„ Reverse Page Orientation
The printing direction is inverted vertically.
„ Flip horizontally (OS X 10.6 only)
Select whether or not to print the page flipped horizontally.