Konica Minolta pagepro 5650 - Manual (Page 142)

Specifying Printer Driver Settings 124
Options Installed
Text Options
Banners
Parameters Settings
Duplex Unit Select Enable if the optional duplexing unit
for the printer has been installed.
„ The default setting is Disable.
Finisher Select Enabled if the output tray unit ( fin-
isher) is installed. Select Disabled if it is not
installed.
„ The default setting is Disabled.
Paper Source Unit Select Unit 3 or Unit 3 + Unit 4 if the optional
trays for the printer have been installed.
„ The default setting is Disable.
Printer Memory Select 128 MB, 256 MB or 384 MB if the
optional memory for the printer has been
installed.
„ The default setting is 128 MB.
Storage Select None, CF (1GB Under), CF (1GB
Over) or HDD for the storage unit that is
installed.
„ The default setting is None.
Parameters Settings
Text Halftone Specifies the halftone for text as Line Art,
Detail, or Smooth.
„ The default setting is Line Art.
Parameters Settings
Starting Banner Specifies the starting banner as none, clas-
sified, confidential, secret, standard,
topsecret, or unclassified.
„ The default setting is none.