Konica Minolta pagepro 5650 - Manual (Page 167)

Ethernet Menu 149
Accessing the Ethernet Menu
Use the following series of keystrokes at the printer to access the Ethernet
menu options on your printer. This menu provides access to all of the config-
urable network items.
"
The printer automatically reboots when the following Ethernet settings
are changed:
z TCP/IP - ENABLE
z DHCP (OFF →ON)
z BOOTP (OFF →ON)
z ARP/PING (OFF →ON)
z IPP - ENABLE
z SLP - ENABLE
z SNMP - ENABLE
z IPv6 - ENABLE
z IPv6 - AUTO SETTING (NO →YES)
Press this
key . . . (until) the message window reads. . .
PROOF/PRINT MENU
or if no optional hard disk kit is installed:
PRINT MENU
INTERFACE MENU
JOB TIMEOUT
ETHERNET
TCP/IP