Konica Minolta bizhub C250 - Manual (Page 140)

Control Panel Settings 6
C250 6-15
Co
ntr
o
l Pa
nel
Se
tti
ngs
Ch
apt
er
6
6.6 Specifying HDD Setting Parameters
Various hard disk operations are available, such as those for erasing data
from the hard disk and for checking the amount of free space on the hard
disk.
The following parameters are available.
!
Detail
The following data is erased when the hard disk is formatted.
Program destinations
Abbreviated destinations
Authentication method settings
User authentication settings
Account track settings
User boxes
Box settings
Documents in boxes
Secure print user box settings
Bulletin board user box settings
To check the hard disk capacity
The amount of space on the hard disk can be checked.
1
In the Administrator Setting screen, touch [Security Setting].
2
In the Security Setting screen, touch [6 HDD Setting].
Parameter Description
Check HDD Capacity Displays the amount of hard disk space that is used and remaining
Temporary Data Over-
write Setting Select either “Mode 1” or “Mode 2” as the method for overwriting
data on the hard disk.
Select whether encrypting or overwriting is given priority when the
security kit is installed.
Overwrite All Data Overwrites all data
HDD Lock Password Specifies the hard disk locking password
HDD Encryption Setting Specify the setting for encrypting the data on the hard disk.
A setting is required only when the security kit is installed.
HDD Formatting Formats the hard disk.