Konica Minolta bizhub 601 - Manual (Page 95)

751/601 4-3
Logging on and logging off 4
– If the authentication unit (IC card type) has been installed, place the IC
card on the authentication unit (IC card type) to complete authentication
and display the Basic screen. For details on performing authentication
using the authentication unit (IC card type) and registering information,
refer to the User’s Guide [Copy Operations].
– If [User Name List] appears, the desired user name can be selected from
the list. Touch [User Name List], touch the button for the desired user
name to select it, and then touch [OK]. Continue with step 3.
– If "Public User Access" on the General Settings screen is set to "Allow",
users with no access to a user name and password can touch [Public
User Access] to use this machine.
– If external server authentication was selected as the user authentication
method, [Server Name] appears. Touch [Server Name], and then select
the desired server.
2
Using the control panel keypad or the keyboard that appears in the
touch panel, type in the user name, and then touch [OK].
– Touch [Shift] to change the characters that are displayed.
– To change a character in the entered text, touch [
←] and [→] to move the
cursor to the character to be changed, touch [Delete], and then type in
the desired letter or number.
– To clear all entered text, press the [C] (clear) key.
– To revert to the previously entered text, touch [Undo].