2 placing the original on the original glass, 2 placing the original on the original glass -12 – Konica Minolta bizhub 601 User Manual
Page 18
Advertising
751/601
1-12
Before use
1
1.5.2
Placing the original on the original glass
1
Lift open the ADF.
– When placing the original on the original glass, be sure to lift open the
ADF at least 20°. If the original is placed on the original glass without the
ADF being lifted at least 20°, the correct original size will not be detected.
2
Place the original on the original glass with the side to be scanned
faces down.
– Load the original pages so that the top of the original is toward the back
or the left side of the machine.
3
Align the original with the
mark in the back-left corner of the original
scales.
4
Close the ADF.
Original scales
Advertising
This manual is related to the following products: