Konica Minolta bizhub 601 - Manual (Page 31)

751/601 2-4
Using copy functions 2
2.2 Selecting the Paper settings
The paper size can be selected automatically according to the original size or
it can be specified manually. Specify the paper size according to the
corresponding procedure, depending on the desired copy settings.
2.2.1 Automatically selecting the paper size ("Auto" Paper
setting)
The size of the loaded original is detected, and copies are produced using
paper of the same size.
If the "Full Size" Zoom setting was specified, paper of the same size as the
original is selected.
If the zoom ratio was increased or decreased, a paper size that corresponds
to the specified zoom ratio is automatically selected.
2
Note
The "Auto Zoom" setting and the "Auto" Paper setting cannot both be selected
at the same time. If the "Auto Paper Select" was selected at the "Auto Zoom"
setting, the Zoom screen appears. Touch the button for the desired zoom ratio.
1
In the Basic screen, touch [Paper].
The Paper screen appears.