1 selecting the finishing method, 1 selecting the finishing method -15 – Konica Minolta bizhub 601 User Manual
Page 42
Advertising
751/601
2-15
Using copy functions
2
*5
The Z-Fold setting is available only if the Z folding unit is installed with the
optional finisher.
2
Note
Certain finishing settings cannot be used together.
Follow the procedures described below to select Finishing settings.
2.6.1
Selecting the finishing method
1
In the Basic screen, touch [Finishing].
The Finishing screen appears.
2
Select the desired Finishing settings.
– To return to the main screen, touch [Main Screen].
3
Touch [OK].
The Basic screen appears again.
Advertising
This manual is related to the following products: