Konica Minolta bizhub 601 - Manual (Page 59)

751/601 2-32
Using copy functions 2
2.11 Scanning the next original to be copied while a
copy job is being printed (next job reservation)
The settings for the next copy job can be specified and the original can be
scanned while a job is being printed so that it can be printed once the current
copy job is finished.
!
Detail
Up to 51 copy jobs, including the current copy job, can be queued.
A copy job can be reserved after scanning of the loaded original is finished. The
next job cannot be reserved while an original is being scanned.
1
If the message "Ready to accept another job." appears while printing
the current job, an original can be loaded, and copy settings can be
specified for the next copy job.
– If the "Copy Operating Screen" parameter was set to "Yes", touch [Next
Copy Job] in the screen that appears during printing to display the Basic
screen.
– For details on positioning the original, refer to "Feeding the original" on
page 1-11 .
2
Press the [Start] key.
3
After the current job is finished, the next copy job begins.