Konica Minolta bizhub C3350 - Manual (Page 19)

3
[Copy Functions] 3-4
1
Place a card on the Original Glass.
% When placing a card on the Original Glass, align it to the left back of the Original Glass. However,
the copied card is located 13/16 inches (20 mm) from the top and left edges of a sheet; change the
card location, if necessary.
% The areas, which are 1/16 inches (2 mm) at the top and left edges of a card, are not scanned be-
cause shade clear processing is carried out.
2
Tap [Paper], and specify the paper tray for printing the card.
% The available paper sizes are A4, letter (8-1/2 e 11), and legal (8-1/2 e 14).
3
Tap [ID Copy].
4
Press the Start key.
The front side of the card is scanned.
5
Turn the card over and place it on the Original Glass.
% Place the card at the same position as that placed in Step 1.
% If you print the card without scanning the back side, tap [Print].
6
Press the Start key.
The back side of the card is scanned, and copying starts.