19 printing (lpr/port9100), 1 tcp/ip settings, 2 lpd setting – Konica Minolta bizhub C353 User Manual

Page 74: 3 raw port number, Printing (lpr/port9100) -61, Tcp/ip settings -61, Lpd setting -61, Raw port number -61

Advertising
background image

C353/C253/C203

1-61

Setup items by operation

1

1.19

Printing (LPR/Port9100)

Specify settings for printing by using LPR or Port9100.

LPR printing is performed via the network using the LPR protocol. LPR printing is used in the UNIX-like OS.

Port9100 printing is performed via the network by directly specifying the RAW port (Port9100) of this machine
connected to the TCP/IP network as a printer of the print destination.

Specify the settings according to the following flowchart.

!

Detail

To print data using LPR or Port9100, settings for the printer driver must be specified after these
settings. For details, refer to the User’s Guide [Print Operations].

1.19.1

TCP/IP Settings

Specify settings to use this machine in a TCP/IP network environment.

For details, refer to

"Specifying general settings for TCP/IP-based communication" on page 1-2

.

1.19.2

LPD Setting

In Administrator mode of PageScope Web Connection, select the Network tab - "TCP/IP Setting" - "TCP/IP
Setting".

Specify the following setting.

1.19.3

RAW Port Number

In Administrator mode of PageScope Web Connection, select the Network tab - "TCP/IP Setting" - "TCP/IP
Setting".

Specify the following setting.

TCP/IP Settings

➀ LPR printing

➁ Port9100 printing

LPD Setting

RAW Port Number

Finish

Item

Definition

Prior confirmation

LPD

Select "Enable".

Item

Definition

Prior confirmation

RAW Port Number

Select the check box for the port to be used, and then spec-
ify the RAW port number.

Advertising
This manual is related to the following products: