Konica Minolta magicolor 1650EN - Manual (Page 140)

Ethernet Menu 5-5
Using the Ethernet Menu Options
If the printer is connected to a network, the following settings should be spec-
ified. For details about each setting, contact your network administrator.
"
When manually setting the IP address, Subnet Mask, and Gateway
turn off DHCP first.
TCP/IP
Enable
IPv4-DHCP/BOOTP
IPv4-IPv4 ADDRESS
Purpose Enables or disables TCP/IP.
If YES is selected, TCP/IP is enabled.
If NO is selected, TCP/IP is disabled.
Options YES
NO
Default YES
Purpose If there is a DHCP or BOOTP server on the network, speci-
fies whether the IP address and other network information
is automatically assigned by the DHCP or BOOTP server.
Options YES
NO
Default YES
Purpose Specifies the IP address of this printer on the network.
Range 0–255 for each xxx triplet
Use the and keys to increase or decrease each
number; use the and keys to move between trip-
lets.
Default 192.168.001.002