Konica Minolta BIZHUB C30P - Manual (Page 143)

Adding a Crown Port After Installing Crown Print Monitor+ 125
7
In the Port Name text box, type the logical name of the port.
"
The logical name of the port is the description identifier for the port.
Each port name must be unique.
"
A maximum of 128 characters can be entered for the port name.
"
If nothing is entered in the IP Address text box, the text entered in
the Port Name text box is added to the IP Address text box.
Change the text as necessary.
8
Click OK.
"
Click Advanced to display the Configure Crown Port+ dialog
box, and then specify the advanced settings for the Crown port.
For details, refer to “Configure Crown Port+” on page 125.
9
In the Printer Ports dialog box, click Close.
10
In the Properties dialog box for the printer, click Close.
"
For Windows NT 4.0, click OK.
Configure Crown Port+
In the Configure Crown Port+ dialog box, specify the advanced settings for
the Crown port.
Parameter Default Setting Description
Status update
interval 5 seconds Specify the interval that Crown Print Moni-
tor+ updates the print manager with the
status of the printer connected to this port.