6 receiving (g3/ip/i-fax), 1 auto rx (dedicated for fax line), Receiving (g3/ip/i-fax) – Konica Minolta BIZHUB C360 User Manual
Page 121: Auto rx (dedicated for fax line) -2, 6receiving (g3/ip/i-fax)
bizhub C360/C280/C220
6-2
6.1
Receiving (G3: Without external telephone connected)
6
6
Receiving (G3/IP/I-FAX)
This section explains the types of fax reception and respective operations.
6.1
Receiving (G3: Without external telephone connected)
6.1.1
Auto RX (Dedicated for fax line)
Specify this mode to use the telephone line dedicated for fax transmission. The machine automatically starts
receiving fax data when it detects the ring signal for the specified times.
Reference
-
To receive fax data in auto mode, Receive Mode must be set to [Auto RX] in [Line Parameter Setting]
of the Utility menu.
To use the telephone line dedicated for fax transmission, the following settings are required.
-
External telephone: Not connected
-
Line Parameter Setting - Receive Mode: Set to [Auto RX]
d
Reference
For details on Line Parameter Setting, refer to page 10-17.
Receiving
Automatically starts receiving fax data
Received
document