Konica Minolta BIZHUB C360 - Manual (Page 132)

bizhub C360/C280/C220 6-13
6.6 Printing upon data reception 6
6.6.3 Printing at full size
If [Min. Reduction for RX Print] is set to [Full Size] in the Utility menu, documents are printed on the paper of
the same size at the same magnification. If the same-size paper is not available, it is printed on the paper
larger than the original size.
Reference
- A document cannot be divided to print on multiple pages.
- The image size larger than 11 e 17 (A3) cannot be printed.
- If the paper tray of the optimal paper size runs out of paper, a message appears prompting you to sup-
ply the paper of the size. The message remains displayed until the paper is loaded in the paper tray.
6.6.4 Printing method upon data reception
The following describes the relationship between the paper size of the received document and the paper size
to be printed.
Original Received document
Print at
full size
Paper size of received doc-
ument [Min. Reduction for RX Print] setting If a specific tray is
assigned in [Tray
Selection for RX
Print]
Full Size 96 to 87 %
Standard size (11 e 17 to 5-
1/2 e 8-1/2 (A3 to A5))
Printed on the same
paper size at the
same scale Printed on the same
paper size at reduced
scale
Printed on the paper
of specified paper
tray at reduced scale