Konica Minolta BIZHUB C252 - Manual (Page 15)

Introduction
x-14 C252
8 Application functions
8-22 C252
Application functions
Chapter 8
4 Touch [Book Copy].
The Book Scanning screen appears.
[Booklet Original] is not available if optional saddle stitcher is not in-
stalled.
5 Touch the button for the desired setting.
Reminder
Do not replace the toner cartridge until the message “There is no Toner.”
appears. In addition, do not replace the toner cartridge of any color other
than the one indicated in the message on the touch panel.
Note
Even though the setting can be specified in increments of 1/3, the setting
will appear at the nearest full increment in the Adjust Color screen.
Detail
If the “Single Color” function is set, the colors are inversed with the se-
lected color. If the “Background Color” function is set, the colors, includ-
ing the selected background color, are inversed.
(The page shown above is an example only.)
Text highlighted in this manner provides
more detailed information concerning
operating procedures or references to
sections containing additional information.
If necessary, refer to the indicated sections.
Detail
Reminder
Text highlighted in this manner
indicates operation precautions.
Carefully read and observe this
type of information.
Note
Text highlighted in this manner
contains references and supplemental
information concerning operating
procedures and other descriptions.
We recommend that this information
be read carefully.
Touch panel screens are shown to
check the actual display.
[ ]
Names highlighted as shown above
indicate keys on the control panel,
buttons in the touch panel, and the
power switches.