Konica Minolta bizhub C353P - Manual (Page 36)

C353P 2-21
Administrator Operations 2
2.7.1 Setting the HDD Lock Password
2
Note
When the main power switch is turned off, then on again, wait at least 10 seconds to turn it on after
turning it off. if there is no wait period between turning the main power switch off, then on again, the
machine may not function properly.
Do not leave the machine with the setting screen of Admin. Settings left shown on the display. If it is
absolutely necessary to leave the machine, be sure first to log off from the Admin. Settings.
<Setting can be made only from the control panel>
0 For the procedure to call the Security Settings menu to the display, see steps 1 through 3 of "Setting
the EnhancedSecurity" on page 2-8 .
1
Call the Security Settings to the screen from the control panel.
2
Press the [,] key to select [HDD Settings].
3
Press the [Menu/Select] or [)] key.
4
Press the [,] key to select [RegisterHDDLockPW].
5
Press the [Menu/Select] or [)] key.
6
Press the [+] and/or [,] key to enter the new 20-digit HDD Lock Password.
– Press the [*] key to delete the last character entered.