Konica Minolta bizhub C353P - Manual (Page 38)

C353P 2-23
Administrator Operations 2
2.7.2 Changing the HDD Lock Password
2
Note
When the main power switch is turned off, then on again, wait at least 10 seconds to turn it on after
turning it off. if there is no wait period between turning the main power switch off, then on again, the
machine may not function properly.
Do not leave the machine with the setting screen of Admin. Settings left shown on the display. If it is
absolutely necessary to leave the machine, be sure first to log off from the Admin. Settings.
<Setting can be made only from the control panel>
0 To call the HDD Lock Password register screen to the display, see steps 1 through 5 of "Setting the
HDD Lock Password" on page 2-21 .
1
Call the HDD Lock Password register screen to the display from the control panel.
2
Press the [+] and/or [,] key to enter the currently registered 20-digit HDD Lock Password.
– Press the [*] key to delete the last character entered.
3
Press the [Menu/Select] key.
? What happens if there is a mismatch in the HDD Lock Passwords?
% If there is a mismatch in the HDD Lock Passwords, a message appears that tells that there is a
mismatch in the HDD Lock Passwords. Enter the correct password.
4
Press the [+] and/or [,] key to enter the new 20-digit HDD Lock Password.
– Press the [*] key to delete the last character entered.
5
Press the [Menu/Select] key.
? What happens if the HDD Lock Password entered does not meet the requirements of Password
Rules?
% The HDD Lock Password entered will be cleared if it does not meet the requirements of the
Password Rules. Enter the correct HDD Lock Password. For details of Password Rules, see
"Password Rules" on page 1-8 .