Konica Minolta bizhub C353P - Manual (Page 40)

C353P 2-25
Administrator Operations 2
2.7.3 Setting the Encryption Key (encryption word)
2
Note
When the main power switch is turned off, then on again, wait at least 10 seconds to turn it on after
turning it off. if there is no wait period between turning the main power switch off, then on again, the
machine may not function properly.
Do not leave the machine with the setting screen of Admin. Settings left shown on the display. If it is
absolutely necessary to leave the machine, be sure first to log off from the Admin. Settings.
<Setting can be made only from the control panel>
0 For the procedure to call the HDD Settings menu to the display, see steps 1 through 3 of "Setting the
HDD Lock Password" on page 2-21 .
1
Call the HDD Settings to the screen from the control panel.
2
Press the [,] key to select [HDD EncryptionSet].
3
Press the [Menu/Select] or [)] key.
4
Press the [+] and/or [,] key to enter the new 20-digit Encryption Key.
– Press the [*] key to delete the last character entered.
5
Press the [Menu/Select] key.
? What happens if the Encryption Key entered does not meet the requirements of the Password
Rules?
% The Encryption Key entered will be cleared if it does not meet the requirements of the Password
Rules. Enter the correct Encryption Key. For details of Password Rules, see
"Password Rules" on
page 1-8 .
% To change the Encryption Key, see "Changing the Encryption Key" on page 2-28 .