Konica Minolta magicolor 1650EN - Manual (Page 169)

Status, Error, and Service Messages 8-32
Error Messages (Warning)
PROCESSING
The printer is processing
data. No action needed.
magicolor 1650
STARTING PRINTER
The printer is being started
up.
PORT AUTH ACTIVE
The IEEE802.1x port is
being authorized.
WARMING UP
The printer is warming up.
REFRESHING
The printer is adjusting the
toner distribution.
This message... means... do this...
CHECK TRAY1
PAPER
(Displaying alternately)
PRESS
MENU/SELECT
Tray 1 is empty. Load the media into
Tray 1, and then press
the Menu Select key.
Media has misfed in
Tray 1. Remove the misfed
media.
I/C END
The imaging cartridge
has reached the end
of its life. Replace the imaging
cartridge.
"
Printing can
continue,
however, the
printing result are
not guaranteed.
If printing is
continued, the
message "I/C
LIFE END"
appears and
printing stops.
I/C LOW
The imaging cartridge
is near the end of its
life. Prepare a new imaging
cartridge.
TRAY 2 IS EMPTY
Tray 2 is empty. Load the media into
Tray 2.
This message... means... do this...