Konica Minolta 7920 - Manual (Page 5)

Konica 7915/7920 1
No. Name Function
1 Touch panel
z
Displays various setting screens and messages
2 [Auto Color], [Full Color],
and [Black] keys
z
Auto Color: The copier automatically determines
whether the document is in color or in black and white,
and then makes a full-color or black-and-white copy
depending on the color of the document.
z
Full Color: The copier makes a full-color copy of the
document regardless of whether the document is in
color or in black and white.
z
Black: The copier makes a black-and-white copy of the
document regardless of whether the document is in
color or in black and white.
3 Keypad
z
Use to type in the number of copies to be made.
z
Use to type in the zoom ratio.
z
Use to type in the various settings.
4 [C] (clear) key
z
Press to reset the number of copies to “1”.
z
Press to erase a setting, such as the zoom ratio or size,
selected using the keypad.
5 [Panel Reset] key
z
Press to reset all copy functions and settings to their
defaults. (All selected settings are cancelled.)
* Stored zoom ratios, stored job settings, and interrupt-
ed or delayed copy jobs are not cancelled.
6 [Stop] key
z
Press to stop a continuous copy operation.
7 [Start] key
z
Press to start the copy operation.
z
If this key is pressed while the copier is warming up,
the copy job is delayed until the copier is finished
warming up.
z
The [Start] key indicator lights up in green to indicate
that the copier can begin copying. The [Start] key indi-
cator lights up in orange to indicate that the copier can-
not make copies.
1 2 7 6 4
5
3
C4004O058CA
Names and Functions of Control Panel Parts