Konica Minolta BIZHUB PRO 1050 - Manual (Page 55)

Machine Manager Security Functions (continued)
- 47 -
7.
Touch Current Password to enter the password currently used,
then touch OK.
The first password: 9-digit alphanumeric serial number of the main body
The main body serial number will be printed at the upper right corner of the
audit log. For details, see the next section “Print audit log” and p. 47 for the
sample log.
8.
If authentication is succeeded, touch New Password to enter the
new password.
The key will not be active until authentication is succeeded.
Do not use your name, birthday, employee number, etc. for a password that
others can easily figure out.
• If authentication fails, the information will be saved in the audit log.
• The current password cannot be used again as a new password.
Touch OK to return to the previous screen.
9.
Touch Check Input to re-enter the same password as above.
Touch OK to return to the previous screen.
10.
Touch OK.