Konica Minolta KIP Color 80 - Manual (Page 7)

Using FlexiSign with KIP
Add KIP Driver to Production Manager
Once Flexi 10 has been installed and upgraded to include the KIP Driver (see your FlexiSIGN
instructions on how to complete this). After a (Hotfolder) Drive and Directory has been
configured in the previous steps, it is then possible to add the KIP Driver in Flexi Production
Manager and proceed with configuring that Hotfolder in Production Manager.
A. In Production Manager, select SETUP and ADD SETUP.
B. Choose COLOR PRINTERS, then brand name of KIP, and model name KIP COLOR 80.
Choose NEXT to proceed.
C. Add your own name for the Setup of KIP Color printer. For how the KIP Color 80 is
connected choose FOLDER. Enter or browse to the Hotfolder and add the correct
drive and directory as setup in the previous steps.