Konica Minolta BIZHUB C652DS - Manual (Page 29)

Drum unit/K, Ozone filter, Toner filter replacement instructions
3
3. Put the drum unit/K on the develop-
ing unit/K.
NOTE
• Do not tilt the drum unit/K when
putting it on the developing unit/K.
(Keep the drum unit/K level.)
• Position the drum unit/K so that
part A of the drum unit/K is inserted
into part B of the developing unit/K.
NOTE
• Position the drum unit/K so that
part C of the drum unit/K is inside
the film [1] located on the main
body rail. (Check that Part C is not
on the top of the rail.)
4. Remove the protective sheet [1] for
the PC drum.
A0P0F2C526DA
A
B
[1]
A0P0F2C560DA
[1]
C
OK NG
A0P0F2C528DA
[1]