Konica Minolta bizhub C353 - Manual (Page 43)

C353/C253/C203 2-14
Using copy functions 2
3
Touch the button for the desired settings, and then touch [OK].
– If "1 > 2" or "2 > 2" is selected, touch [Output Bind Direction], select the
binding position for the copy, and then touch [OK].
– If "Auto" is selected, the binding margin is set at the top or at the left. The
binding position is automatically determined according to the orientation
of the loaded original. If the original length is 11-11/16 inch (297 mm) or
less, a binding position along the long side of the paper is selected. If the
original length is more than 11-11/16 inch (297 mm), a binding position
along the short side of the paper is selected.
4
Touch [Close].
The Basic screen appears again.