Konica Minolta bizhub 751 - Manual (Page 102)

751/601 2-86
Administrator Operations 2
2.14.4 Removing a Certificate
2
Note
Do not leave the machine with the Admin Mode setting screen left shown on the display. If it is
absolutely necessary to leave the machine, be sure first to log off from the Admin Mode.
<Setting can be made only from PageScope Web Connection>
0 For call the SSL/TLS Setting menu to the display, see steps 1 through 3 of "Setting the SSL" on
page 2-81 .
1
Start PageScope Web Connection and call the SSL/TLS Setting menu to the display.
2
Select [Remove a Certificate] and click the [OK].
3
Click the [OK].
4
Click [OK] and restart the machine.
– No certificates can be removed if Enhanced Security Mode is set to [ON].