Konica Minolta Printgroove - Manual (Page 10)

Server Setup 2
Printgroove POD Queue Quick Install Guide 2-3
2.4 Launch ::Admin for Printgroove
::Admin for Printgroove is a Web Utility that allows you to administrate your
Printgroove POD system. Before installing the Printgroove POD Queue client
or the Printgroove POD Driver, some administrative settings should be spec-
ified.
0 Compatible Web Browser:
Windows Internet Explorer 7 or later / Mozilla Firefox 2.0 or later
1
Start up the Web browser.
2
In the Address bar, enter the following URL, and then press the [Enter]
key.
– http://<IP address of Printgroove POD Server>/admin
– Example: If the IP address of the Printgroove POD Server is
192.168.1.100
http://192.168.1.100/admin
3
The Administrative Login screen opens. Enter the User Name and
Password. By default, these settings are:
- User Name: sysadmin
- Password: password
Click the [Log In] button. ::Admin for Printgroove’s Home page opens:
::Admin for Printgroove’s Home page is divided into three sections.
1
2
3