Konica Minolta bizhub 222 - Manual (Page 36)

Installing the printer driver 2
362/282/222 2-13
11
Restart the computer.
This completes the uninstallation procedure.
2
Note
Be sure to restart the computer.
Even if the printer driver is deleted using the method described above,
the model information file will remain in the computer for Windows 2000/
XP/Server 2003. Therefore, the driver may not be able to be overwritten
when reinstalling the same version of the printer driver. When installing
the same version of the printer driver, be sure to also delete the files de-
scribed below.
Check the “C:\WINDOWS\system32\spool\drivers\w32x86” folder and
delete the folder of the corresponding model if it is available. If the Konica
Minolta PCL driver and Konica Minolta PostScript driver are both in-
stalled, the model information of both drivers is deleted. If one driver is
remaining, do not delete it.
Delete the “oem*.inf” and “oem*.PNF” files in the “C:\WINDOWS\inf”
folder. (The asterisk (*) in the file name displays a number, and the
number varies according to the environment of the computer.)
Before deleting the files, open the INF file, check that the model name is
described in the last several lines, and then check that the file of the cor-
responding model is available.
The PNF file is the same number as the INF file.
In Windows Vista/Server 2008, when you have deleted a file using “Re-
move driver and driver package”, this operation is not required.