Network printing from a windows operating system – Konica Minolta bizhub 222 User Manual
Page 48
Setting up network printing
3
362/282/222
3-3
With NetWare
The Novell NetWare 4.x—6 print server functions are supported.
You can connect this printing system to a network using Novell NetWare
4.x—6 as the network operating system and send print jobs from the client
to the print server (network controller). The three modes supported are as fol-
lows:
-
Nprinter
-
Pserver
-
NDS/NDPS
2
Note
For details on the NetWare functions, refer to the NetWare operation
manual.
With Macintosh
You can print from your Macintosh computer using LPR or AppleTalk.
You can connect this printing system to a print server in an AppleTalk envi-
ronment and send print jobs from the Macintosh computer to this machine.
Network connection methods that can be selected in each Windows op-
erating system
This chapter describes the settings that must be specified for network print-
ing.
Setting procedures differ depending on the method of networking printing
used (Windows, LPR, or IPP printing). Select the best method of network
printing for your Windows environment.
Network printing from a Windows operating system
For details, refer to “Windows Printing” of the User’s Guide [Print Opera-
tions].
Protocol
used
Windows
2000
Windows
XP/Vista
Windows
NT 4.0
Windows
Server 2003/
Server 2008
Windows print-
ing
TCP/IP,
NetBEUI
+
+
+
+
LPR printing
TCP/IP
o
o
o
o
IPP printing
TCP/IP
o
o
o
Port 9100 print-
ing
TCP/IP
o
o
o