Konica Minolta bizhub C250 - Manual (Page 119)

7 Transmission Applications
7-4 Network Fax
Tr
ansmission
Ap
plicat
ion
s
Chapter 7
7.2 Application Functions Overview
The following function is displayed in the Scan Setting screen or the
Application screen.
[Cancel]
Returns to the former screen.
[OK]
This is pressed when returning to the fax
screen.
[OFF]
Release the setting that has been set and
return to the preceding screen.
[Reset]
Turn off all the functions provided on the
screen.
In case of monochrome mode
In case of color mode
Application function screen
Mixed Original: You can send document pages of mixed sizes in a single se-
quence of operations. (page 7-7)
Bind Position: Function to specify the stapling position of the original when
reading a double side original in the ADF and correct vertically
the rear face of the original. (page 7-9)
Frame Erase: When transmitting pages in a book, this function allows you to
erase dark bands that would otherwise be reproduced in the
marginal areas of the transmitted pages. (page 7-12)
Background Adjustment: Function to send a message after adjusting the density in the
background color of the original. (page 7-15)
Sharpness: Function to send a message after making the edge of character
sharpened. (page 7-18)
No use is available while in the color mode of the IP Address
Fax.
Number of Originals: Not used for Network Fax mode.
Scan Size: This function allows you to designate the size of the document
to be transmitted. It is convenient when you intend to transmit
part of a page or pages. (page 7-21)
Header Setting
*1
: When transmitting jobs by FAX, specify a method to attach the
Header Information for each job. (page 7-24)
[Header Setting] cannot selected depending on the country.