Konica Minolta bizhub C250 - Manual (Page 142)

Transmission Applications 7
Network Fax 7-27
Tr
ansmission
Ap
plicat
ion
s
Chapter 7
7.11 Sending after the check of destination
When you specify the destination and press the [Start] button, the Check
Destination screen and the number of cases appear. Sending after the
destination check prevents erroneous transmission due to incorrect
destination.
!
Detail
To use the Destination Check Display function, you should set the
Destination Check Display function to ON at the time of the Function
ON/OFF Setting. Refer to page 10-55 for more information on the setting
of the Destination Check Display function.
1
Press [Fax] on the control panel to view the FAX screen, if it is not
already displayed.
2
Set [Scan Setting], [Comm. Setting] if necessary.
3
Designate the destination.
– See "Method for Specifying Addresses" on page 3-24 for
information about designating the destination.
4
Set the original document.
– See "Placing the Original on the Machine" on page 3-9 for
information about setting the document.
5
Press [Start].
Check Destination screen appears.
6
Check that a correct destination is specified and press the [TX] or
[Start] button.