Konica Minolta bizhub PRO 1200 - Manual (Page 21)

Installation
3
bizhub PRO 1200/1200P/1051 3-2
This will install the copier as a Windows printer. The printer will be created
using an lpr port, e.g.
myprinter:print.
5
To establish another connection (NetBIOS or port 9100), select [Other
connection], and click [Next].
Note
If your network uses DNS, the administrator should make sure that the
network name assigned to the copier matches the network name stored
in the DNS.
When the connection configuration is finished, you will be directed to the
driver selection dialog.