Konica Minolta bizhub PRO 1200 - Manual (Page 15)

Overview
2
bizhub PRO 1200/1200P/1051 2-2
2.2 Composition of a product
These image controllers include an Ethernet-compatible network port
and a USB port (USB 2.0).
2.2.1
Memory
The image controller is equipped with 2GB memory by default.
2.2.2
Other options
The following options installed on the printer enables variacle functions.
When Paper Source Unit is only PF-702, it is possible to select it from
Tray1 to 5 together with the main body.
When Paper Source Unit is PF-702 and PF-703, it is possible to select
it from Tray1 to 8 together with the main body.
Multi Folder (FD-503) enables to select “Punch”, “PI Cover sheet” and
“Fold” function.
Multi Hole Punch Unit enables to select “Multi Punch” function.
Large PI enables to select “PI Cover sheet” function.
Saddle Stitcher enables to select “Center Staple and Fold”, “Trim” and
“Fold” function. Saddle Stitcher cannot be installed when Stacker (LS-
505) is installed.
Stacker enables to stack of a lot of output papers. The Stacker cannot
be installed when the Saddle Stitcher is installed.
Stapler enables to select “Staple” and “Offset” function.
Installing the Perfect Binder allows you to make a roll-up bookbinding.
Note
Installing various options built in the copier properly on the printer driver
allows you to use a variety of printing functions shared by the copier.