Konica Minolta bizhub PRO C6500P - Manual (Page 40)

Overview of the Scanning Features 2
Fiery S450 65C-KM Network Scanner 2-29
Register any Custom Size
1
Press [Size Input] to display the Size Setting screen.
2
Press a button showing a numeric for a size in length/width and make
a selection. And then press the numeric keypad or the [
▲] or [▼] key to
enter any size.
– A size that can be entered: 100 mm to 303 mm in length, and 140
mm to 438 mm in width.
3
Press [Size Registration] to display the Size Registration screen.
4
Pressing any registration name button to make a selection. Pressing
[Next] or [Previous] allows you to scroll up or down the page. (When se-
lecting a button for which the registration name has been already dis-
played, the size and the registration name registered are overwritten.
And when [Delete] is pressed, the pop-up screen is displayed for the
confirmation of deletion. Press [Yes] to delete registered information
that has been selected.)
5
Press [Add] to display the name entry screen.
6
Enter the name and press [OK] to return to the Size Registration screen.
7
Press [Close] to return to the Size Setting screen.
8
Press [OK]. A size entered on the Size Setting screen is displayed.
9
Press [OK] to return to the Scan Settings screen.
Invoke any Custom Size
1
Press [Size Input] to display the Size Setting screen.
2
Press [Seize Recall] and select a size that is registered.
3
Press [OK] to return to the Size Setting screen. A size read out is dis-
played.
4
Press [OK] to return to the Scan Settings screen.