Konica Minolta bizhub C20X - Manual (Page 35)

Utility Menu 29
DEFAULT TX
Settings
MEMORY TX / DIRECT TX
Select the desired method for sending docu-
ments.
„ MEMORY TX : With this method, the fax
transmission starts after the entire docu-
ment is scanned and stored in the mem-
ory. The total number of pages is
automatically printed with the page num-
ber in the header. However, the memory
may become full if there are many pages
in the document or if the data is large due
to the fine image quality (resolution).
„ DIRECT TX : With this method, the trans-
mission is performed in real time in the
transmission sequence of the destina-
tions. If there are many pages in the doc-
ument, the fax can be sent with this
method without the memory becoming
full.
To change the method for sending documents
during transmission from the default setting
specified here, refer to “Memory Transmission
and Direct Transmission” on page 52.
HEADER
Settings
OFF / ON
Select whether or not to print transmission
source information (date/time of transmission,
sender's name, sender's fax number, session
number and page number) for the machine in
the transmitted document.
"
If PTT SETTING in the USER
SETTING menu is set to U.S.A ,
CANADA and KOREA , the settings
cannot be changed.