Konica Minolta bizhub C20X - Manual (Page 97)

Problems When Receiving Faxes 91
Problems When Receiving Faxes
If the fax cannot be received correctly, refer to the following table, and then
perform the indicated operation. If the fax still cannot be received correctly,
even after performing the described operations, contact your technical repre-
sentative.
"
For details on the error messages, refer to “Error Messages on the
Message Window” on page 93. For details on troubleshooting proce-
dures for document misfeeds, paper misfeeds, poor print quality, or
empty toner, refer to the Printer/Copier/Scanner User’s Guide on the
Documentation CD/DVD.
Transmission is not pos-
sible. The transmission proce-
dure may have been
performed incorrectly. Check the transmission
procedure, and then try
sending the fax again.
The fax number may be
wrong. Check the fax number.
The destination in the
favorite list, the speed
dial destination or the
group dial destination
may be incorrectly pro-
grammed. Check that the keys
were correctly pro-
grammed.
The telephone line may
be incorrectly con-
nected. Check the telephone line
connection. If it is dis-
connected, connect it.
There may be a problem
with the recipient’s fax
machine (such as, no
paper or turned off). Contact the recipient.
Symptom Cause Solution
The received fax is
blank. There may be a prob-
lem with the telephone
connection or with the
caller’s fax machine. Check that the machine
can make clean copies.
If it can, have the caller
send the fax again.
The caller may have
loaded the pages back-
ward. Contact the caller.
Symptom Cause Solution