Konica Minolta bizhub C250 - Manual (Page 68)

Using copy functions 2
C250 2-31
Using copy f
unct
ions
Chapter 2
2.10 Selecting Fold & Staple settings
The paper that is fed out can be folded in half and
stapled at two places along the center.
The “Fold & Staple” setting is available when finisher
FS-603 is installed or if the saddle stitcher is installed
on optional finisher FS-514. The “Fold” setting is
available when the saddle stitcher is installed on
optional finisher FS-514.
The following procedure describes how to specify Fold
& Staple settings.
To bind paper at the center (Fold & Staple settings):
Finisher FS-603
1
In the Basic screen, touch [Fold & Staple].
The Center Erase settings screen appears.