To select a paper type setting, To select a paper type setting -39 – Konica Minolta bizhub C250 User Manual
Page 76
Using copy functions
2
C250
2-39
Using copy f
unct
ions
Chapter 2
To select a Paper Type setting
If a setting for special paper, such as overhead
projector transparencies and other special paper, is
selected for a paper tray, that tray is not selected
automatically with the “Auto Paper Select” setting or
the automatic paper-tray-switching feature. However,
a paper tray set to “Single Side Only” is given priority
when the “Auto Paper Select” setting is specified.
There are limits on the types of paper that can be
loaded in a paper tray. For details on the types of paper
that can be loaded, refer to the User’s Guide [Copy
Operations].
If overhead projector transparencies or thick paper is
loaded into the paper tray, be sure to select the
corresponding paper type, otherwise a paper misfeed
may occur.
The following procedure describes how to specify the
setting for special paper loaded into the 1st tray.
1
In the Basic screen, touch [Paper].
The Paper screen appears.