Konica Minolta BIZHUB 223 - Manual (Page 104)

bizhub 423/363/283/223 9-13
9.4 Parameter details 9
Reference
- In [Original Size], you can select A0, A1, A2, B1, B2, or B3; however, the printing paper size is reduced
to the size specified in [Paper Size]. [Same as Original Size] cannot be selected in [Paper Size].
The large size registered for the paper set in Print Server Properties is also reduced to the size specified
in [Paper Size]. The paper set in Print Server Properties is available when [Display paper set in Print
Server Properties] is selected in the [Settings] tab.
- To use paper of which the size is other than the standard sizes, specify the custom paper size. You can
register a custom size by selecting [Custom Size] from the paper size or original size option.
- To print data of the size corresponding to the full standard size, selecting "W" of the standard size paper
for original size enables the data to be printed at the center of paper larger than the original size.
For example, if you want to center and print 8-1/2 e 11 size data on 11 e 17 sized paper, create data
with the "8-1/2 e 11W" size, and then, using the printer driver, set [Original Size] to [8-1/2 e 11W] and
specify the paper tray to be used as [Paper Tray].
Load the 11 e 17 sized paper in the desired tray in the machine, and select the tray in [Paper] of the
[Basic] page on the control panel.
To print on custom sized paper, use the bypass tray, select [Change Tray Settings] - [Custom Size], and
enter the desired paper size.
- Specify [Side2] when printing on the back side of paper.
- [User] of Paper Type is the frequently used paper type registered on the machine side. For details on
registering the user paper, refer to the [User's Guide Copy Operations].
- In [Output Method], [Secure Print], [Save in User Box], [Save in User Box/Print], and [ID & Print] are avail-
able only when a Hard Disk is installed.
[Output Method] [Print] Select this option to print immediately.
[Secure Print] Select this option to save the document to be printed in
[Secure Document User Box] of the machine. When
printing, entering the [ID] and [Password] is required
from the control panel of the machine. Select this op-
tion when printing highly confidential documents.
[Save in User Box] Select this option to save the document to be printed in
a User Box of the machine.
[Save in User Box and
Print] Select this option to save the document in a User Box
and print at the same time.
[Proof Print] After one copy of the document is printed, the machine
stops printing temporarily. Select this option to avoid
misprinting a large volume of print jobs.
[ID&Print] Select this option to save the document to be printed in
[ID & Print User Box] of the machine. When printing,
user authentication must be performed via the control
panel of the machine.
[User Settings...] − Specify the ID and password, or the file name and User
Box number when performing [Secure Print] or [Save in
User Box].
[Authentica-
tion/Account
Track...] − Click this button to specify the user name and pass-
word when [User Authentication] is enabled on this ma-
chine, or the account name and password when
[Account Track] is enabled on this machine.
[Copies] 1 to 9999 Specify the number of copies to be printed.
[Collate] ON/OFF Select this check box to collate pages sequentially
when printing multiple sets of copies.
[Offset] ON/OFF Select this check box to stagger each set when printing
multiple sets of copies.
[Paper Settings
for Each Tray...] [Paper Type Settings] Select a paper tray to be specified.
Selectable items vary depending on the option installa-
tion status.
[Paper Type] Select the type of paper to be loaded onto the paper
tray.
Function Name Option Description