Konica Minolta BIZHUB 223 - Manual (Page 64)

bizhub 423/363/283/223 5-28
5.3 Windows 2000 5
11
Select a desired printer driver folder in the CD-ROM, and then click [Open].
% Select a folder according to the printer driver, operating system, and language to be used.
Selectable printer drivers:
PCL driver, PS driver and fax driver
12
Click [OK].
The [Printer:] list appears.
13
Click [OK].
14
Follow the instructions on the pages that follow.
15
Click [Finish].
% If the [Digital Signature] window appears, click [Yes].
16
After finishing the installation, make sure that the icon for the installed printer is displayed in the [Print-
ers] window.
17
Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver installation.
Once the settings for the printer have been configured, you can use the printer in the same way as a general
local printer.
5.3.4 For local connection
When this machine is connected via a USB port, the printer driver can be installed with plug and play.
Reference
- When a USB connection is used, the printer driver is installed easily with the plug and play feature. How-
ever, it can also be installed using the Add Printer Wizard. To use the Add Printer Wizard, select the
USB port to be connected in the [Choose a printer port] page.
1
Connect this machine to the computer using a USB cable, and then start the computer.
NOTICE
When starting up the computer, do not plug in or unplug the cable.
2
Insert the printer driver CD-ROM for Windows into the CD-ROM drive of the computer.
3
Turn on the main power of this machine.
The [Found New Hardware Wizard] window appears.
% If the [Found New Hardware Wizard] window does not appear, turn the machine off, then on again.
In this case, turn off this machine, and then wait approximately 10 seconds before turning it on
again. If you turn the printer on immediately after turning it off, it may not function correctly.
4
Click [Next >].
5
Select [Search for a suitable driver for my device (recommended)], and then click [Next >].
6
Select [Specify a Location], and then click [Next >].
7
Click [Browse...].
8
Select a desired printer driver folder in the CD-ROM, and then click [Open].
% Select a folder according to the printer driver, operating system, and language to be used. Selecta-
ble printer drivers:
PCL driver, PS driver and fax driver
9
Click [OK], and then follow the instructions on the pages that follow.
10
Click [Finish].
% If the [Digital Signature] window appears, click [Yes].