Configuring the lpr settings, Configuring the lpr settings -7 – Konica Minolta BIZHUB 223 User Manual

Page 72

Advertising
background image

bizhub 423/363/283/223

6-7

6.1

Mac OS X 10.2/10.3/10.4/10.5/10.6

6

Configuring the LPR settings

[TCP/IP Settings] for the machine

Specify the IP address for the machine.

[LPD Setting] for the printer

Before using LPR printing, enable LPD printing in [LPD Setting] for the machine.

d

Reference

For details on specifying the IP address for the machine, refer to the [User's Guide Network Administrator].

For details on the [LPD Setting] for the machine, refer to the [User's Guide Network Administrator].


Configuring the TCP/IP settings for the computer

Configure the TCP/IP settings for the Macintosh computer connected to the printer.

1

In the [Apple Menu], select [System Preferences...].

2

Click the [Network] icon.

3

The Ethernet setting window appears.

% For OS X 10.5/10.6, select [Ethernet], and then click [Advanced...].

% For OS X 10.4, select [Built-in Ethernet], and then click [Configure...].

4

Click the [TCP/IP] tab.

5

Configure the settings including the IP address and subnet mask according to the settings of the net-
work to which the Macintosh computer is connected.

6

Click the close button at the top left corner of the window.

% When the [This service has unsaved changes] message appears, click [Apply].


Adding a printer

1

In the [Apple Menu], select [System Preferences...].

2

Click the [Print & Fax] icon.

3

Click [+] on the [Print & Fax] window.

4

Click [IP] or [IP Printer].

5

In [Protocol:], select [Line Printer Daemon - LPD].

Advertising
This manual is related to the following products: