To specify redialing, To specify redialing -13 – Konica Minolta BIZHUB C450 User Manual

Page 128

Advertising
background image

Using fax functions

4

C450

4-13

Using

f

a

x

fu

nct

ions

Chapter 4

– [Pause]: Touch this button to insert a pause when

dialing. Touch [Pause] once to insert a 1-second
pause. In addition, multiple pauses can be
entered. “P” appears in the screen. If the PBX
(private branch exchange) connection is set to
“ON”, touch [Pause] after the outside line access
code (for example, “0”) for accurate dialing when
transmitting from an inside line to an outside line.
“P” appears in the screen.

– [–]: Touch this button to insert the dash as

separator symbol while dialing. This has no effect
on the dialing. “–” appears in the screen.

– [Abbr.]: Use the keypad to enter the abbreviated

dialing number (up to 2,000 from 0001 to 2000)
and specify a destination registered as an
abbreviated number.

To specify redialing

Dialing the same recipient again is called “redialing”.

1

In the Program screen, touch [Direct Input].

The Direct Input screen appears.

Advertising