Konica Minolta bizhub C31P - Manual (Page 219)

Solving Problems with Media Misfeeds 205
Media is
misfeeding. Transparencies have
collected static elec-
tricity in the tray. Remove the transparencies and load
them in the tray one sheet at a time.
Do not fan transparencies before load-
ing them.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used. Use KONICA MINOLTA approved
media.
See “Media Specifications” on page
104.
The media roller is
dirty. Clean the media supply roller.
For more details, refer to “Media Roll-
ers” on page 173.
Symptom Cause Solution