Konica Minolta bizhub 20P - Manual (Page 90)

Control Panel
80
4
Print a test page
4
You can use the Go button or the printer driver to print a test page.
Using the Go button
4
a
Turn off the printer.
b Make sure that the front cover is closed and the power cord is plugged in.
c Hold down Go as you turn on the power switch. Keep Go pressed down until the Back Cover, Toner,
Drum and Paper LEDs light up. Release Go. Make sure that the Back Cover, Toner, Drum and Paper
LEDs are off.
d Press Go again. The printer will print a test page.
Using the printer driver
4
If you are using the Windows
®
printer driver, click the Print Test Page button in the General tab of the printer
driver.