Konica Minolta Magicolor 5430 - Manual (Page 127)

Status, Error, and Service Messages 119
Error Messages (Warning)
Note
If an error message ( TONER EMPTY, TRANSFER END , etc.) appears,
print out the configuration page, and then check the status of the other
consumables. For details on printing the configuration page, refer to
“Printing the Configuration Page” on page 88.
This message... means... do this...
FUSER LIFE END
The fuser unit has
reached the end of its
life. Contact Technical Sup-
port with the error infor-
mation.
FUSER LIFE LOW
The fuser unit is near
the end of its life. If necessary, contact
Technical Support with
the error information.
SIZE MISMATCH
A media size mis-
match occurs when
AUTO CONTINUE
(Engine menu) is set
to
ON .
Load the correct media
size.
TONER EMPTY
X
The X toner cartridge
is empty.
(Appears when
ENGINE/TONER
EMPTY CONTINUE
is set)
Replace the toner car-
tridge.
X TONER LOW
The X toner cartridge
is low and should be
replaced within 200
pages at 5% cover-
age of letter/A4
pages. Prepare the specified
color toner cartridge.
TRANSFER END
The transfer belt unit
has reached the end
of its life. Replace the transfer belt
unit and reset the
counter in the
ENGINE/
SERVICE/RESET
COUNTER TRANS-
FER UNIT menu.
TRANSFER LOW
The transfer belt unit
is near the end of its
life. Prepare a new transfer
belt unit.