Konica Minolta Magicolor 5430 - Manual (Page 47)

Media Types 39
"
If you have problems feeding 20 sheets, try loading only 1–10 sheets
at a time. Loading a large number of transparencies at one time may
cause static buildup, thus causing feeding problems.
Use transparencies that are
„ Approved for laser printing
DO NOT use transparencies that
„ Have static electricity that will cause them to stick together
What Is the Guaranteed Imageable (Printable) Area?
The printable area on all media sizes is
up to 4 mm (0.157") from the edges of
the media.
Each media size has a specific image-
able area, the maximum area on which
the printer can print clearly and without
distortion.
This area is subject to both hardware
limits (the physical media size and the
margins required by the printer) and
software constraints (the amount of
memory available for the full-page frame buffer). The guaranteed imageable
(printable) area for all media sizes is the page size minus 4 mm (0.157") from
all edges of the media.
Capacity Tray 1 Up to 20 transparencies, depending on their
thickness
Tray 2 and 3 Not supported
Orientation Face up
Driver
Media Type
Transparency
Duplexing Not supported
a a
a
a
a = 0a = 0.157" (4 mm)
Printable
Area
a = 4 mm (0.157")