Konica Minolta bizhub C3850 - Manual (Page 48)

[Description of Utility Keys] 5-20
5.7 [Printer Settings] 5
[Image Printing] Select the RGB image data processing method.
•
[RGB SOURCE]: Specify the color space of the input RGB. [sRGB] is spec-
ified by default.
• [RGB Intent]: Specify the color conversion property that is changed from in-
put RGB to device CMYK. [Photographic] is specified by default.
• [RGB Gray]: Specify the printing method of black and gray colors.
[Bk=CMYK Gray=CMYK] is specified by default.
• [Destination Profile]: Specify the output profile. To register a profile in this
machine, use Web Connection. For details, refer to Chapter 1 "Using Web
Connection" in [User's Guide: Applied Functions]. [Auto] is specified by de-
fault.
[Text Printing] Select the RGB text data processing method.
•
[RGB SOURCE]: Specify the color space of the input RGB. [sRGB] is spec-
ified by default.
• [RGB Intent]: Specify the color conversion property that is changed from in-
put RGB to device CMYK. [Vivid] is specified by default.
• [RGB Gray]: Specify the printing method of black and gray colors. [Bk=K
Gray=K] is specified by default.
• [Destination Profile]: Specify the output profile. To register a profile in this
machine, use Web Connection. For details, refer to Chapter 1 "Using Web
Connection" in [User's Guide: Applied Functions]. [Auto] is specified by de-
fault.
[Graphics Printing] Select the RGB graphic data processing method.
•
[RGB SOURCE]: Specify the color space of the input RGB. [sRGB] is spec-
ified by default.
• [RGB Intent]: Specify the color conversion property that is changed from in-
put RGB to device CMYK. [Vivid] is specified by default.
• [RGB Gray]: Specify the printing method of black and gray colors. [Bk=K
Gray=K] is specified by default.
• [Destination Profile]: Specify the output profile. To register a profile in this
machine, use Web Connection. For details, refer to Chapter 1 "Using Web
Connection" in [User's Guide: Applied Functions]. [Auto] is specified by de-
fault.
[Simulation] Configure the simulation settings.
•
[Simulation Profile]: Select the simulation profile for input CMYK. [None] is
specified by default.
• [Sim. Intent]: Specify color conversion properties to carry out a simulation.
[Relative Color] is specified by default.
• [CMYK Gray]: Specify the printing method of plate K in the CMYK input
data for simulation. [Bk=CMYK Gray=CMYK] is specified by default.
[Gradation Adjustment] Adjust gradation when reproduction quality of the printed image is degraded.
[Tone Calibration] Select whether or not to enable the density adjustment.
[ON] is specified by default.
[CMYK Density] Adjusts the density of highlight, intermediate, and shadow parts for each color.
[0] is specified by default in every case.
[Image Stabilization] Adjusts the displacement or inclination of the scanning section.
•
[Initialize + Image Stabilization]: Initializes the log information on image sta-
bilization control and executes image stabilization.
• [Image Stabilization Only]: Executes the standard image stabilization pro-
cess.
[Image Stabilization Only] is specified by default.
[Color Separation] Select whether or not to enable the color separation. If the color separation is
enabled, one page is divided into each color element of CMYK, and the divided
images are printed in 4 pages in black.
[OFF] is specified by default.
Settings Description