Konica Minolta bizhub C3850 - Manual (Page 34)

[Description of Utility Keys] 5-6
5.1 [System Settings] 5
[List/Counter]
To display: [Utility] - [Administrator Settings] - [System Settings] - [List/Counter]
Prints the job setting list of this machine and configure the paper count.
[Priority Tray]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Priority Tray]
Select a tray to be used with top priority.
If paper of the same size is loaded in multiple trays, paper is fed from the tray with top priority.
[Tray 1] is specified by default.
[Paper Separation Ad-
justment] Adjust the paper separation position on each side of paper for 2-sided printing.
•
[Front]: Adjust the balance of the paper separation or image transfer per-
formance when a paper jam or image failure occurs on the front side for 1-
sided or 2-sided printing due to high ambient temperature and humidity.
• [Back]: Adjust the balance of the paper separation or image transfer perfor-
mance when a paper jam or image failure occurs on the back side for 2-
sided printing due to high ambient temperature and humidity.
Increase the value if paper jams are occurring, and decrease it if the image is
transferred unevenly.
[0.0 mm] is specified by default.
[Main Scan Direction
Zoom Adjustment] Adjust the zoom ratio in the main scanning direction for each color.
[0] is specified by default.
[Main Scan Direction
Zoom Adjustment Con-
firmation Printing] Print a test pattern to adjust the zoom ratio in the main scanning direction.
[List Output] Print error log information or halftone patterns.
[Event Log] Print event logs such as error logs or consumable replacement histories.
[Halftone 64] Print a halftone pattern of density 25% for each color.
[Halftone 128] Print a halftone pattern of density 50% for each color.
[Halftone 256] Print a halftone pattern of density 100% for each color.
[Gradation] Print a gradation pattern.
[Life] Configure a setting to replace consumables.
[New Release] Reset the counter value after replacing the fusing unit, transfer belt unit, trans-
fer roller unit, and toner filter.
[User Paper Settings] Register special paper with [User1] to [User5].
•
[Media Adjustment]: Select Front Side/Back Side or Color/Black to make
adjustments when an error has occurred on a print image of the user paper.
• [Basic Weight]: Specify the weight of the user paper. The following shows
the default settings.
[User1]/[User2]: [77]
[User3]: [105]
[User4]: [139]
[User5]: [183]
• [Test Pattern Output]: Prints test patterns on the selected user paper.
Settings Description
Settings Description
[Management List] Prints a list of settings for [User Settings] and [Administrator Settings] among
others.
[Activity Report] Print a report that contains sending and receiving records.
[User Account Counter
List Page] Print a report that contains counter information.
[Scan TX Report] Prints a report that contains scan sending records.