Konica Minolta bizhub 160 - Manual (Page 34)

Getting ready 3
SU-502 3-3
G
e
tt
ing
r
ead
y
Chap
ter
3
About the LEDs
LED Function
LED1 (LINK) This LED ligths up when the network cable is connected correctly. If
this LED is not lit, check the connection again, even if the machine ap-
pears to be connected correctly. If this LED is not lit when both ends
are connected correctly, the network cable may be damaged.
LED2 (ACT) This LED blinks when data is being transferred.